If you do not have a GRBL machine or do not want to install the Easel driver, you can still set up a machine profile to generate gcode from Easel and Easel Pro.
Go to Machine > Setup a new machine > 3rd party machine.
In the machine details section:
- Select "Other" for the Make and Motion control.
- Enter the work area for your machine. If you do not know the work area please consult with your machine provider.
- Select if your spindle is controlled by the machine (hardware) or if you Manually turn it on/off.
It should look something like this:
Once you have your machine set up, open up any Easel project.
You should now see an green "Export" button instead of carve button: