If your carves are coming out the wrong size, you may need to adjust your steps/mm firmware settings to ensure your axes are moving accurately. Please note, making firmware changes is at your own risk. We also recommend referring to the manufacturer for instructions as they know your machine best.
One thing to try first is a reset using Easel's machine inspector. Turn your machine on, and connect to Easel. You can open up the Machine Inspector by going to Machine > General Settings > Machine Inspector.
In the Machine Inspector scroll down to the console and send this command:
Press enter, this will unlock your machine.
You can now send the reset command:
Press enter. You should receive a message that says "OK."
Once you have reset the firmware, you can try jogging the machine to ensure it is moving the correct distance.
If this does not resolve the issue, we recommend reaching out to your machine manufacturer for the correct firmware values and to ensure your machine is assembled properly.
You can also try calculating your steps/mm settings using these links:
This post on the Community Forum explains how to calculate steps/mm: