Here is how to prepare your g-code in MeshCAM to import into Easel.
1. Make sure to set your stock size to accurately reflect your material.
2. Make sure the origin is set to the lower left corner of the material, with the Z at the stock surface
3. If you are using a Carvey, make sure the model is placed away from the smart clamp in the lower left corner.
4. Export the gcode using the "Basic G-code (inch)" option.
1. Make sure to set your stock size to accurately reflect your material.
2. Make sure the origin is set to the lower left corner of the material, with the Z at the stock surface
3. If you are using a Carvey, make sure the model is placed away from the smart clamp in the lower left corner.
4. Export the gcode using the "Basic G-code (inch)" option.