Inventables Help Center home page
X-Carve Easel Projects Forum Support
  1. Inventables
  2. X-Carve
  3. X-Carve Troubleshooting

Articles in this section

  • Machine won't connect
  • Wrong material selected
  • Quiet Cut spindle won't turn off
  • Feed rate and/or depth per pass is too high
  • Z-Axis zero is wrong
  • Depth is wrong
  • Grinding noise during a carve
  • Part of the design was skipped
  • The bit is too large relative to the design or parts of the design
  • Design carved in the wrong place
See more

The bit broke

  • March 18, 2020 19:40
  • Updated
Follow

During a job, the bit snapped off.

Possible Causes

  • Wrong material selected
  • Feed rate and/or depth per pass is too high
  • Facebook
  • Twitter
  • LinkedIn
Was this article helpful?
1 out of 4 found this helpful
Have more questions? Submit a request
Return to top

Related articles

  • Wrong material selected
  • Feed rate and/or depth per pass is too high
  • Carving Bits 101 - Bit Basics
  • Carving went off path
  • Color-Coded Bit Chart: Choosing the Right Bit
Ask the Community
Email Support
Call Support
(312) 775-7009
Inventables